| 1. | Optimal matching based on spatial relationship in local regions
基于空间关系的子区域最佳匹配算法 |
| 2. | Then the torsion bar spring according to the optimal match is design
再由最优匹配刚度值设计出相应刚度的扭杆弹簧。 |
| 3. | 5 . in order to gain the optimal match of dynamics performance , suspension parameters of a bogie are optimized when the bogie is designed
在进行转向架的设计研究时，为了得到其动力学性能的最优匹配，西南交通大学槽士研究生学位论文第iv页必须对其悬挂参数进行优化分析。 |
| 4. | In this dissertation , suspension parameters of the gauge - changeable bogie are optimized by using dynamic program , thereby , the optimal match of dynamics parameters of a bogie is gained
论文利用动力学程序对变轨距转向架的一、二系悬挂参数进行了优化分析，从而得到转向架动力学参数的最佳匹配。 |
| 5. | Reveal the soil dynamic performance under compaction process . set up a dynamic model for the whole system . study the optimal matching problem between the vibratory system and impactive system
用数学手段拟合试验数据，得到土内应力的分布规律和变化规律，揭示了土体在压实过程中的动态特性，并建立了系统的动力学模型。 |
| 6. | The optimal matching of automotive powertrain has been an important subject to automobile engineers . the matching between engine and powertrain will directly affect the performance and fuel economy
发动机与传动系统的匹配研究是目前汽车界所关注的重大研究课题,二者之间匹配的好坏程度,直接影响到整车的动力性和燃油经济性。 |
| 7. | About integrated control problems and optimal matching methods on plough implement unit , as an example in this paper , were discussed using fuzzy logical control theory . it gives a practical and referenced method on study auto - control of walking implement combinations
本文以典型的犁耕机组为例应用模糊控制理论，探讨了犁耕机组的综合控制问题及其最佳匹配方法，为研究行走式作业机组的自动控制提供了一种有实用价值的参考。 |
| 8. | ( 3 ) . the flattening arithmetic of an edfa was presented based on the inter - correlative function between the gain spectrum function of the edfa and that of the reserve transmission spectrum of the lpfg . for optimal matching between the two spectra , the flattening arithmetic calculates the variation of the resonant amplitude and wavelength of the lpfg
Iii .提出了一种动态增益均衡的平坦算法，这种算法的本质就是利用掺铒光纤放大器增益谱函数和新型长周期光纤光栅的透射谱反转谱函数的相关性，给出新型长周期光纤光栅谐振峰幅度和位置的调节量，使改变后的新型长周期光纤光栅的反转谱线能和edfa的增益输出谱线进行最佳匹配。 |
| 9. | Then three means of optimal matching are presented : on the basis of the tyre ' s properties calculation to build up the equation reflecting the rational matching relations ; according to the condition where no tyre ' s horizontal stiding to establish the equation and based on the tyre ' s grounding mark length to set up the equation
提出了3种确定最佳匹配的方法：即根据轮胎特性计算外倾角和前束值的合理匹配关系式；根据轮胎工作中无横向滑移时建立了外倾角和前束值的合理匹配关系式；根据轮胎接地印迹长度建立外倾角和前束值的合理匹配关系式。 |
